Connecting the composites industry

All Topics See All

Additive Manufacturing

Adhesives

Advanced Air Mobility

Aerospace

Application

ATL/AFP

Autoclave

Automation

Automotive

Biomaterials

BMI

Bonding

Braiding

CAMX

Carbon Fibers

Ceramic Matrix Composites

Coatings

Composites 4.0

Composites Basics

Compression Molding

Construction

Consumer

Core

Curing

Custom Content

Cutting/Kitting

CW Top Shops

CW Trending

Cyanate Ester

Defense

Design & Tooling

Design and Testing

Design/Simulation

Digital Demos

Digitization

Economics

Editorial

Electric Vehicles

Electronics

Epoxies

Fabrics/Preforms

Fastening

Feature

Filament Winding

Finishing & Fastening

Focus on Design

FRP Rebar

Glass Fibers

Global Composites

Graphene

Hi-Temp Resins

Hydrogen Storage

IACMI

Infrastructure

Infusion

Injection/Overmolding

Inside Manufacturing

JEC

Job Postings

Ketones

Lifecycle Analysis

Machining/Drilling

Marine

Market Outlook

Markets

Mass Transit

Materials

Materials Testing

Medical

Molds/Tools

Nanomaterials

National Composites Week

Natural Fibers

NDT

Out of Autoclave

PAEK

Past, Present and Future

PEEK

PEKK

Plant Tours

Post Cure

Predicting Failure

Prepregs

Pressure Vessels

Processes

Pultrusion

Recycling

Reinforcements

Repair

Resins

RTM

Sensors

Sheet Molding Compound

SHM

Space

Startups & Investors

Sustainability

Thermoplastics

Trends

Troubleshooter

Weaving

Welding

Wind/Energy

Work In Progress

Workforce Development
Markets See All

4 Jun 2025 Advanced Air Mobility
Archer pilots Midnight, advances to next phase of flight testing
Flight operations tested the composites-intensive aircraft’s VTOL and CTOL capabilities, important for its civil and defense operations.

2 Jun 2025 Advanced Air Mobility
AMSL Aero makes H2 testing milestones for hybrid Vertiia eVTOL
Bankstown and Wellington fuel cell work has helped to verify Vertiia’s powertrain while also feeding electricity into the airport grid, bringing the composites-intensive Australian aircraft closer to flight.

30 May 2025 Advanced Air Mobility
Vertical performs piloted VX4 eVTOL flight in open airspace
Successful wingborne flight following approval from the UK Civil Aviation Authority (CAA) completes Phase 3 of Vertical’s path toward certification and commercial operation.

30 May 2025 Pressure Vessels
GVP tanks pass extreme fire tests, confirm market readiness
Full-size, high-pressure Type 3 composite tank test results conclude safe containment during severe fire scenarios, concluding the final stage of GVP’s certification program.

30 May 2025 Trends
Flyber launches U.K. composites manufacturing site for advanced mobility applications
The startup’s design automation and composite material layup and curing technologies target lightweighting for aerospace, UAVs, eVTOL and high-performance mobility platforms.

30 May 2025 Inside Manufacturing
Prepreg compression molding supports higher-rate propeller manufacturing
To meet increasing UAV market demands, Mejzlik Propellers has added a higher-rate compression molding line to its custom CFRP propeller capabilities.
Design & Tooling See All

9 Jun 2025 Molds/Tools
Moore Brothers Co. acquires Symmetrix Bristol in Rhode Island
Merging of the two teams, which includes the acquisition of Symmetrix’s composite tooling assets and a move to its flagship facility, will establish wide-ranging and complementary skills.

6 Jun 2025 CAMX
Noncontact optical strain gage delivers complete 3D surface measurement insight
CAMX 2025: The Aramis system by Trilion, based on DIC and photogrammetry technology, performs high-precision measurements in the sub-micrometer range, across a wide range of testing environments and material types.

5 Jun 2025 Molds/Tools
LFAM specialization caters to 3D printed composite tooling, molds
CAMX 2025: AES is committed to driving technological advancement and application development in 3D printing, distinguishing its diverse capabilities through several tooling examples.

4 Jun 2025 Aerospace
Wichita State, Dassault Systèmes open Manufacturing Innovation Center
Aviation companies of all sizes will be able to improve their resilience and efficiency via the center’s virtual design, automation and additive manufacturing capabilities.

4 Jun 2025 Materials Testing
Instron launches AVE3 noncontact video extensometer
Leveraging CDAT airflow technology and dynamic lighting, the AVE3 delivers a virtually noise-free strain signal, guarding against typical air disturbances when measuring materials in the lab.

4 Jun 2025 Design/Simulation
CactuX in-situ BOX simulates real-life conditions of composite samples during CT analysis
The autonomous in-situ BOX combines the environment temperature control function and power supply function, enabling new possibilities for material and internal structure research.
Materials See All

6 Jun 2025 Aerospace
Hartzell’s carbon fiber Pathfinder is approved for Aviat Husky
Three-blade composite propeller has received supplemental type certification and can replace existing two-bladed propellers on Husky aircraft models.

6 Jun 2025 CAMX
Aerospace manufacturing innovations demonstrate the future of aerocomposites
CAMX 2025: Attendees are able to explore several of NIAR ATLAS’ prototype developments in person, highlighting tool-less space manufacturing, AI-enabled inspection and repair and thermoplastic overmolding.

4 Jun 2025 Carbon Fibers
McLaren Automotive celebrates 1995 win with special edition 750S coupe
Celebratory 750S super car pays homage to McLaren’s 1995 24 Hours of Le Mans win, featuring a host of additional composite component innovations, color choices and other vehicle enhancements.

4 Jun 2025 Carbon Fibers
Dow to sell 50% ownership in DowAksa carbon fiber JV
Dow agrees to sell half of its interest in DowAksa to its 50/50 joint venture partner Aksa Akrilik Kimya Sanayii A.Ş. in an effort to focus more on core, high-value downstream businesses.

3 Jun 2025 Thermoplastics
The AMRC announces U.K. open-access TPC tape development
Dedicated research platform, available to businesses and researchers at the AMRC’s Factory of the Future facility, features Cygnet Texkimp’s hybrid line and tape slitter on a pilot scale.

3 Jun 2025 Space
Rocket Lab continues building access to space with latest launch vehicle missions
Successful execution of multiple customer missions with reusable composite Neutron and Electron rockets as well as new partnerships highlight Rocket Lab’s expertise.
Processes See All

10 Jun 2025 CAMX
Composite curing ovens are built for maximum performance
CAMX 2025: Wisconsin Ovens presents equipment for vacuum bag, filament-wound and honeycomb block heating technologies, offered with a variety of specific features and options.

5 Jun 2025 Additive Manufacturing
LFAM specialization caters to 3D printed composite tooling, molds
CAMX 2025: AES is committed to driving technological advancement and application development in 3D printing, distinguishing its diverse capabilities through several tooling examples.

30 May 2025 Prepregs
Prepreg compression molding supports higher-rate propeller manufacturing
To meet increasing UAV market demands, Mejzlik Propellers has added a higher-rate compression molding line to its custom CFRP propeller capabilities.

27 May 2025 Trends
Damen, CEAD explore composite 3D printing potential via HDPE Workboat project
Dutch innovators collaborate to investigate large-format 3D printing for functional shipbuilding at the recently opened Maritime Application Center.

23 May 2025 Defense
From prototypes to performance: Composites company makes inroads to new markets
Top Shops 2024 honoree Calian’s composites division blends R&D, rapid prototyping and scalable production with deep engineering integration and corporate synergy.

21 May 2025 Glass Fibers
Delta Marine shares 110-foot custom motor yacht with novel hull
In-progress build highlights Delta’s first hull designed entirely using CFD, a step forward in performance innovation for the shipyard known for its custom composites construction expertise.
Composites 101 See All

28 May 2025 Wind/Energy
Composites end markets: Energy (2025)
Despite political and supply chain challenges, renewable and nuclear energy continue to grow in use. Composite materials enable current and future energy technologies across sectors.

7 May 2025 Composites Basics
Laser cleaning in composites manufacturing
Laser cleaning technologies for cleaning production molds for composites offer alternatives to harsher, less-friendly methods with features like automation and higher power cleaning.

30 Apr 2025 Advanced Air Mobility
Composites end markets: Aviation and advanced air mobility (2025)
Despite persistent supply chain issues, markets were set for healthy growth before Trump policies and tariffs, yet long-term trends favor composites in new platforms. Meanwhile, advanced air mobility shakes out and moves forward.

25 Apr 2025 Composites Basics
Crashworthiness testing of composites: A building block approach, Part 3
Third in a series on crashworthiness testing analyzes the upper levels of the building block approach and the importance of numerical analyses.

31 Mar 2025 Automotive
Plasma moves beyond improved bonding to coatings, multifunctional composites
Plasmatreat cold plasma systems clean, activate surfaces and apply nanocoatings for dielectric barriers and more.

17 Mar 2025 Feature
Composites end markets: Electronics (2025)
Electronic and smart device innovations achieved through the use of advanced materials ranging from thermoplastic composites to biomaterials emphasize high-volume production and sustainability.
- Webinars
- Events
- Suppliers
- Whitepapers
Webinars See All

19 Jun 2025
Gantry vs. Robotic Thermoplastic 3D Printing for Tooling, Fixtures and Jigs
KraussMaffei, a leader in plastic processing equipment, recently entered the large format additive manufacturing world with their gantry and robotic 3D printers. KraussMaffei will share the features, benefits and differences between these systems and present several use cases across multiple industries. Large scale additive manufacturing (LSAM) systems have come a long way over the last 10 years. Their speed and accuracy and wide range of materials they can print with have opened up new opportunities in tooling, fixtures, jigs, prototypes and more. In the automotive, aerospace and general manufacturing sectors. Join KraussMaffei as they explore these technologies and how to apply them. Agenda: Brief introduction to KraussMaffei Why KraussMaffei entered this market Review the features of gantry and robotic systems Discuss the wide range of materials currently available Explain the qualification process for new materials Evaluate the key differences between gantry and robotic LSAM printers Share various applications of tooling, fixtures and jigs across automotive, aerospace and other industries Review how companies can work with KraussMaffei to develop an AM Strategy

On Demand
Enhancing Composite Durability and Aesthetics with PVF Film
This session explores the properties of polyvinyl fluoride (PVF) film and its role in improving the durability and performance of composite materials. PVF film has been widely used in various industries due to its resistance to UV exposure, moisture, stains and corrosion. Beyond protection, it also enables process flexibility and customized surface aesthetics. Agenda: The unique characteristics of PVF film and how it enhances durability in extreme environments. The history and applications of PVF film in composite materials, including interior and exterior use cases. Its role as a silicone-free release liner for achieving different surface finishes. The environmental considerations of PVF film as a non-PFAS material.

On Demand
An Overview Into the New ISO TS for Graphene-Related 2D Materials
Caio Lo Sardo, VP of MITO Material Solutions has taken a leading role in the first graphene document in development led by the U.S. committee within the International Organization for Standardization (ISO) Technical Committee (TC) 229, Nanotechnologies. Right now, when looking at graphene materials, no standard exists to classify graphene-related 2D materials and ensure the material will have concise technical specifications. The new standard includes a framework that is tailored to be useful for users, academia and regulators. This project will establish consensus-based parameters for commercial graphene purchases to confirm the material data sheets meet the expected standards. During this overview, Caio will share insights into the compilation of framework that have been built around graphene, with industry peer review, the study of the characteristics and zero in on what matters going forward for people who use graphene.

On Demand
AI-Powered Quality Assurance in Laser Projection Processes
Combining advanced laser projection technology with AI-powered inspection delivers unmatched precision and efficiency. By attending this webinar, you will learn how AI enhances quality control in laser-guided manual composite manufacturing. Gain insights into detecting foreign objects (FOD) and verifying parts placement with LAP's INSPECT-PRO AI camera system. This system seamlessly integrates with LAP's CAD-PRO laser projection systems to optimize your composite production. Discover how AI-powered camera systems identify potential issues early on, preventing escalation, reducing rework and minimizing waste. Agenda: Why AI-powered QA for composite manufacturing? Black-on-black detection capabilities Precise placement verification Instant foreign object detection Seamless integration with the LAP ecosystem

On Demand
Using Recycled Carbon Fiber Nonwovens to Accelerate AAM Development
Advanced air mobility (AAM) is reshaping the future of passenger and cargo transport, prioritizing lightweight and sustainable materials to drive advancements in electric flight and unmanned aerial vehicle (UAV) technology. In this webinar, Dr. Mandy Clement and Dr. Tim Swait will present a recent collaboration between the Advanced Manufacturing Research Centre (AMRC) and James Cropper. This pioneering project focused on developing reinforced UAV wing skins that offer strength, lightweight properties and recyclability in equal measure. In the project, the emphasis was on the use of advanced manufacturing techniques, such as tailored fiber placement (TFP), to precisely reinforce critical areas of the UAV wing skin without adding unnecessary weight. James Cropper’s recycled carbon nonwovens are utilized within the project to facilitate part manufacture via TFP, providing a lightweight substrate for continuous fibers to be stitched to, thereby improving handling during production. The webinar will focus on the project’s main objectives, discussing the challenges and material validation that resulted in the delivery of highly efficient, lightweight UAV structures with sustainable materials integral to the design and successful manufacture. Agenda: Introduction to the AMRC’s project to develop lightweight, reinforced wing skins for a UAV demonstrator The selection and testing of materials to support UAV part design and manufacture An overview of recycled carbon nonwovens covering their structure, supply, key differences from virgin fiber and the benefits they offer The main conclusions from the project, outputs and next steps

On Demand
Sustainability and Biobased Products in the Composites Industry
Gain insights into driving sustainability through lifecycle assessment and understanding the distinctions among various biobased materials, helping to navigate their environmental impact and guide informed decisions in product development and eco-friendly solutions. Agenda: Sustainability in composites Differentiating between biobased, biodegradable and recyclable materials Life cycle assessment (LCA) for sustainability-driven product marketing Innovating solutions for composite building materials

17 Jun 2025 New & Upcoming
Fixing the Core of the Grids: Powering the Future with Composites Register Now
Events See All

18 Jun 2025
SAMPE China

22 Jun 2025
ASTM International June 2025 Committee Week
Over 12,000 ASTM standards operate globally. Defined and set by ASTM, these standards improve the lives of millions every day. Numerous ASTM committess will meet in Toronto, Cananda in June 2025.

22 Jun 2025
ASTM International D02 June 2025 Committee Week
ASTM Committee D02 on Petroleum Products and Lubricants meets twice a year, in June and December. Approximately 1,000 members attend the five days of technical meetings. The committee, with a current membership of 2,364 industry professionals and experts, currently has jurisdiction of 871 standards, published in five volumes of the Annual Book of ASTM Standards: Volumes 05.01, 05.02, 05.03, 05.04 and 05.05. These standards have, and continue to play, a preeminent role in all aspects relating to the standardization of Petroleum Products and Lubricants.

4 Aug 2025
24th International Conference on Composite Materials (ICCM24)
The University of Delaware Center for Composite Materials (CCM) is hosting ICCM 24 as part of it 50th anniversary celebrations. The conference will feature a dedicated industry track, international networking opportunities and cutting-edge research and insights.

25 Aug 2025
National Composites Week 2025
The goal of National Composites Week is to celebrate and bring attention to the myriad ways that composite materials and composites manufacturing contributes to the products and structures that shape the American manufacturing landscape today. Learn how you can participate in this year's National Composites Week on NationalCompositesWeek.com.

3 Sep 2025
PU China/UTECH Asia
PU China/UTECH Asia 2025, a leading event for the Chinese polyurethane market, will take place at the Poly World Trade Expo in Guangzhou, September 3-5 2025. The event alternates between Shanghai and Guangzhou each year to allow exhibitors access to the polyurethane industry that is spread across the China.

16 Jun 2025 New & Upcoming
Paris Air Show Register Now
Suppliers See All

Additive Manufacturing

Business Development

Cleaning & Pretreatment

Inspection, Testing, Measurement

Manufacturing Execution & Automation Software & Controls

Manufacturing Services

Materials

Pollution Control & Sustainability

Supplies

Temperature/Pressure Control Equipment

Workholding

Get Listed!
Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.
Request Your Free Listing
Whitepapers See All

10 Jan 2024
Jetcam addresses the economic importance of efficient material nesting
Jetcam’s latest white paper explores the critical aspects of nesting in composites manufacturing, and strategies to balance material efficiency and kitting speed.

8 Jan 2024
Arris Composites demonstrates advantages of natural fibers applied with Additive Molding
Arris presents mechanical testing results of an Arris-designed natural fiber thermoplastic composite in comparison to similarly produced glass and carbon fiber-based materials.

27 Dec 2023
Cevotec white paper presents novel approach for H2 tank production
Cevotec, a tank manufacturer, Roth Composite Machinery and Cikoni, have undertaken a comprehensive project to explore and demonstrate the impact of dome reinforcements using FPP technology for composite tanks.

23 Nov 2023
KCARBON and KIST develop lyocell/PLA/wood biocomposites
Initial demonstration in furniture shows properties two to nine times higher than plywood, OOA molding for uniquely shaped components.

1 Nov 2023
Exel Composites releases guide for design considerations in composite tubes
The composite tubes white paper explores some of the considerations for specifying composite tubes, such as mechanical properties, maintenance requirements and more.

21 Jul 2023
UAMMI white paper addresses composites recycling in Utah
Foundational research discusses the current carbon fiber recycling landscape in Utah, and evaluates potential strategies and policies that could enhance this sustainable practice in the region.
Articles See All

2 Jun 2025 Aerospace
Post Cure: CMC family of materials handles extreme environments
Arceon’s Carbeon materials serves to bridge the gap between research and industry, capable of handling extreme temperatures and thermal shock among other properties for defense, space and beyond.

30 May 2025 Advanced Air Mobility
Prepreg compression molding supports higher-rate propeller manufacturing
To meet increasing UAV market demands, Mejzlik Propellers has added a higher-rate compression molding line to its custom CFRP propeller capabilities.

28 May 2025 Wind/Energy
Composites end markets: Energy (2025)
Despite political and supply chain challenges, renewable and nuclear energy continue to grow in use. Composite materials enable current and future energy technologies across sectors.

23 May 2025 RTM
From prototypes to performance: Composites company makes inroads to new markets
Top Shops 2024 honoree Calian’s composites division blends R&D, rapid prototyping and scalable production with deep engineering integration and corporate synergy.

22 May 2025 Aerospace
CIRA qualifies CMC structures for the reusable Space Rider
Italian team designs, builds and tests multiple large, complex thermal protection system structures made from patented ISiComp C/C-SiC ceramic matrix composites.

21 May 2025 Startups & Investors
Fairmat and the rise of deep tech in France
This first column in CW’s new Investors and Startups column series takes a closer look into the region of France, decoding the technologies, teams and funding actors driving its composites innovation.

4 Jun 2025 Startups & Investors
Precision, proximity and purpose in Swiss composites innovation
Sustainability See All

27 May 2025 Sustainability
Tech-Fab Europe publishes LCA study on glass fiber fabrics
The association’s study reveals the benefits of strengthening European supply chain for glass fiber fabrics to help decarbonize in line with EU net-zero targets.

27 May 2025 Sustainability
HRC highlights automotive material innovation, scalable manufacturing and sustainable systems
The composites company is meeting the transition to electrification and vehicle lightweighting via hybrid monocoques, use of thermoplastic composites and carbon fiber and recycling.

21 May 2025 Natural Fibers
European natural fibers emerge in bio-based architectural projects
The Alliance for European Flax Linen and Hemp highlights several projects in which flax and hemp fibers are being used, emphasizing their increasing use as high-performance, low-impact construction methods.

19 May 2025 Sustainability
Isodan mobile recycling plant supports fiberglass, composites processing at Greater Renewable of Iowa
Now operational, the containerized plant enables GRI to process up to 20,000 pounds of end-of-life wind blades per shift, opening the way for repurposing opportunities.

12 May 2025 Automotive
Spanish startup to ramp up production of “recyclable” EV prototype
Liux’s BIG electric vehicle features multiple structural components manufactured via RTM from flax fabric and a thermoset resin said to enable the entire component to be recycled and reused again.

2 May 2025 Bonding
Henkel, Synthomer partner to cut carbon emissions in adhesives
Integration of Synthomer Clima resins into Henkel Technomelt hot-melt adhesive portfolio targets significant Scope 3 GHG emissions reductions for electronics, automotive, comsumer and composites customers.

28 May 2025 Sustainability
EuCIA publishes declaration of the European Circular Composites Alliance
Knowledge Centers

CompositesWorld Collections
CW’s editors are tracking the latest trends and developments in tooling, from the basics to new developments. This collection, presented by Composites One, features four recent CW stories that detail a range of tooling technologies, processes and materials.

Sustainability
The composites industry is increasingly recognizing the imperative of sustainability in its operations. As demand for lightweight and durable materials rises across various sectors, such as automotive, aerospace, and construction, there is a growing awareness of the environmental impact associated with traditional composite manufacturing processes.

Automated Composites
In this resource, CGTech offers vital information about the benefits, processes, and vendors behind automated composite manufacturing.

High-Temp Composite

Sensors for Composite Processing

The Now and Next in Composites
CW Tech Days

Composites in Infrastructure and Construction
CompositesWorld’s CW Tech Days: Infrastructure event offers a series of expert presentations on composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in Advanced Air Mobility
Explore the cutting-edge composites industry, as experts delve into the materials, tooling, and manufacturing hurdles of meeting the demands of the promising advanced air mobility (AAM) market. Join us at CW Tech Days to unlock the future of efficient composites fabrication operations.

Thermoplastics for Large Structures
Thermoplastics for Large Structures, experts explored the materials and processing technologies that are enabling the transition to large-part manufacturing.

Sustainability in Composites Manufacturing
Explore the technologies, materials, and strategies that can help composites manufacturers become more sustainable.

Design, Simulation and Testing Technologies for Next-Gen Composite Structures
CompositesWorld’s Tech Days: Design, Simulation and Testing Technologies for Next-Gen Composite Structures is designed to provide a multi-perspective view of the state of the art in design, simulation, failure analysis, digital twins, virtual testing and virtual inspection.

New Space Applications
Explore the technologies, materials and strategies used by composites manufacturers working in the evolving space market.

Bonding and Welding
Explore the latest technologies and strategies involving bonding and welding, essential processes in the assembly and manufacturing of composite materials, providing reliable methods for joining components.

Merging Materials and Technologies for Infrastructure and Construction
During this CW Tech Days event, sponsored by Composites One, experts will offer presentations to review and evaluate the composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in the Hydrogen Economy
In these sessions, experts will discuss the emerging hydrogen economy and the opportunities for composites in this lucrative space.
Collections See All

Composites in Hydrogen Storage
A report on the demand for hydrogen as an energy source and the role composites might play in the transport and storage of hydrogen.

Recycled Composites
This collection features detail the current state of the industry and recent success stories across aerospace, automotive and rail applications.

Thermoplastic Composites
This collection details the basics, challenges, and future of thermoplastic composites technology, with particular emphasis on their use for commercial aerospace primary structures.

Tooling
This collection features recent CW stories that detail a range of tooling technologies, processes and materials.

Home
Suppliers
Instron

Instron

ITW

AS SEEN ON CW
VIDEOS

825 University Ave.
Norwood, MA 02062 US
800-877-6674 | 781-828-2500
web@instron.com
instron.com

CONNECT

About Instron

Instron is a world leader in the materials testing industry, offering a comprehensive range of solutions for testing composite materials and components – including testing systems and software used to determine tensile, compression, shear, torsion, planar biaxial, impact, and rheological properties.

IS THIS YOUR COMPANY?

UPDATE YOUR LISTING SUBMIT A PRESS RELEASE TO OUR EDITORIAL TEAMS

Video Gallery

25 Ways to Test a Syringe Webinar

Installing Grips on an Instron® Testing System

ASTM D7791 | Uniaxial Fatigue Properties of Plastics

Righting and Moving an Instron® Floor Model Universal Testing System

As Seen On CompositesWorld

Instron launches AVE3 noncontact video extensometer

Determining steel/composite failure load of bonded repair assemblies

Modeling and characterization of crushable composite structures

Plant tour: Arris Composites, Berkeley, Calif., U.S.

Hexcel opens new R&T center in Salt Lake City

CAMX 2022 exhibit preview: Instron

Plant tour: ÉireComposites, Galway, Ireland

Instron introduces TrendTracker module for Bluehill Central software

Instron introduces 3400 and 6800 Series universal testing systems

Instron introduces Bluehill Central lab management software

VIEW ALL ARTICLES

Instron Supplies the Following Products

Editorial, News, and Products